4 Piece Basic Air Chisel Set

Features and Benefits: Here is a basic set of Pneumatic Tools to handle the most common problems encountered in the typical shop. This is a good "starter" set. Packaged in a leatherette pouch. Set consists of: 1965 Muffler-Tailpipe Remover 1971 Splitting Tool 1972 6" Cold Chisel 1975 Rivet and Bolt Cu....(more info)

Ball joint Separater Air Chisel

Features and Benefits: The opening between tines is 15/16", which will handle ball joints with a minimum of shock to the assembly 8" in length Weight: .74 lbs.....(more info)

18 Cold Chisel Air Chisel

Features and Benefits: Designed to cut bolts, nuts, tees, angles and frame members Blade is 5/8" Weight: 1 lb.....(more info)

18in. Nut Splitter

Features and Benefits: Provides the extra reach needed to work around air conditioner parts....(more info)

Slotted Panel Cutter Air Chisel

Features and Benefits: This tool leaves a clean, smooth edge with the cut curling up through the slot in the middle. This tool has the exclusive Old forge CURL-CUT™.....(more info)

Splitter Air Chisel

Features and Benefits:The bend of the blade allows this tool to slice through bushings, cylinder sleeves and muffler connections with ease.  This tool has the exclusive Oldforge Curl-Cut™.....(more info)

Inside Muffler Cutter Air Chisel

Features and Benefits:The convex cutting edge design will cut the motor side off muffler.  These jobs are easier and faster when you use the proper tool.  8-1/4" in length. ....(more info)

Sheet Metal Trimmer Air Chisel

Features and Benefits:When you need to edge light sheet metal without stretch or distortion, use this sheet metal trimmer and eliminate much of the touch up grinding that is necessary with other trimmers.  This is not designed to be a panel cutter.  This tool has the exclusive Oldforge Curl-Cut™. ....(more info)