Features and Benefits:Designed to remove and install press-on-type belt driven accessory pulleys found on most vehiclesKit includes components necessary to remove and install pulleys on pumps with the common 3/8-16 threaded shaftUnique interchangeable component removes and installs pulleys on GM Quad 4, GM 3.1 L, and Ford 4.6L enginesDesigned to be....(more info)
Features and Benefits:One piece tool designed for removing and installing power steering pump pulleys on most domestic vehicles including early GM, Chrysler and FordUse on pulleys with grooved hub diameterss of 1-1/8 in., 1-1/4 in., 1-5/16 in. and 1-3/8 in.....(more info)
Features and BenefitsWorks on most spline, hex, and two flat design tie rods Spring-loads upper jaw pivots to accommodate tie rods ranging in size from 10mm-18mmWrench is self-adjusting Cam action increases the gripping pressure as the load applied to the handle increasesHeat-treated for durability This tool is used for adjusting tie rods ....(more info)
Features and Benefits:These components will install wheel studs on almost all foreign and domestic light trucks and SUVsSizes: 1/2 in. - 20, 9/16 in. - 18, 12mm - 1.75, 14mm - 1.5 plus the spacer and washer....(more info)
Features and Benefits:Specially designed tool for the removal of rubber exhaust system hangers, i.e. tailpipe, exhaust pipe, and mufflerFeatures self-locating forcing pin, and "cushioned," slip-resistant handles at a 25 degree offset for easy access in restricted areasSkin Card Weight - 4.50 lbs. Shelf Pack - 504 cu. in.....(more info)