Combination Square Set

Features and Benefits:Blades fully hardened and temperedProtractor head has levelBlades: 4R (graduated in 8ths, 16ths, 32nds and 64ths) Finished in baked blue enamelCombination sets include square head, center head and protractor head with 12" bladesSquare head has level and scriber pointSquares and combination sets meet Federal††Specifications Typ....(more info)

Disc and Rotor Combo Kit

Features and Benefits: Consists of Disc Rotor/Ball Joint Gage and Digit Disc Brake Micrometer The Disc Rotor/Ball Joint Gage checks ball joint wear, disc rotor runout, tire and wheel runout, gear backlash, valve guide wear, etc. 12 Flex arm can be set to almost any measuring position Digit Disc....(more info)

6 Piece Telescoping Gage Set

Features and Benefits:Range: 5/16" to 6" Satin chrome finishRigid handle with self-centering featureProvides uniform contact pressureContact points precision ground Knurled lock maintains the setting of measuring arms to permit sizing with a micrometer or caliperIncludes case....(more info)

16/400mm Extended Range Drum & Rotor Kit with Xtra-Value Caliper

Features and Benefits:Measures disc brakes and up to 16 in. on brake drums Resolution: .0005 in./.01mmRange up to 16 in./400mmDirect inch/metric conversionIncludes Xtra Value Electronic caliper This Drum and Rotor Measuring Kit measures disc brakes and up to 16" on brake drums. Kit includes set of clamps; 4 sets of set screws; 1 Allen wrench; 1 set....(more info)

Small Hole Gauge Set

Features and Benefits: Range: .125in. to .500in Satin chromedSensitive knurled knob at handle for size adjustmentsFlat bottom of half ball gaging surface permits use in the shallowest recessesIncludes case ....(more info)

2 Piece Combination Squares & 12 Blade with 4R graduation

....(more info)

16/400mm Extended Range Drum & Rotor Measuring Kit

Features and Benefits:Measures disc brakes and up to 16 in. on brake drums When measuring brake drums only, add 8 in. to measurement For use with 6 in. & 8 in. calipersFurnished in shop hardened caseIncludes set of clamps, 4 sets of set screws, 2 Allen wrench, 1 set of 3-3/4" contact points, 1 set fo 3/4" cone contact points, 1 set of 3/4" flat con....(more info)