Flexible Fender Puller with Pull Ring - 1.5 Ton

Features and Benefits Flexible - fits any wheel well or lipped panel 1.5 ton rated - more than enough power and strength All-in-one tool Easy to use - spring loaded hinges hold clamp in position 1 year warrantyThe flexible fender puller can be bent to fit any fender shape, no need for multiple clamps. Perfect for head and tail light ....(more info)

1/4 Hole Punch

Features and Benefits: This is the most efficient hole punch that you will ever own - you'll be amazed at how little pressure is needed to punch out holes With the one and one quarter inch deep throat you will be able to get the best overlap capability for your plug welds....(more info)

Slimline Plastic Pop Riveter

Features and Benefits Slim profile Greater accessability Pulls 2 sizes of rivets One handed use One year warrantyThe Spitznagel Slimline Plastic Pop Riveter is the perfect solution to pulling rivets in the tightest places. This riveter is one inch tall and requires only two inches clearance to fully pull a plastic rivet. Bumper faci....(more info)

Tram Control Point Lock

Features and Benefits: Use this accessory at the end of either the DF-3 or DF-3D to secure the end of the tram in a control point hole Simply twist the knob and the two bars move out to lock you in, making 1-man use even easier DF-310 for DF-3 ....(more info)

Tram Shortener

Features and Benefits: The Tram Shortener attaches to the DF-3 center bar allowing shorter measurements to be taken Simply affix it to a specific point and subtract a predetermined number from your final measurement....(more info)

Wedge Utility Set

Features and Benefits: Constructed from high quality nylon Includes a 30mm wedge, 60mm wedge, and a dismounting tool ....(more info)

8mm HSCO Titanium Spot Weld Drill Bit

Features and Benefits: This is our most popular spot weld drill bit; 8.0mm or 5/16th is the most common size of spot welds that need to be removed The Titanium coating on this bit will help prevent the bit from dulling due to overheating The twist is the same size as the shank which is also 8.0mm and has a flat spot on it to be tightened i....(more info)

Plastic Lever Scraper

....(more info)