How to change a flat tire.



Product Categories
Abrasive & Grinding Products
Air Compressors and Accessories
Air Tools and Accessories
Auto Air Conditioning Tools
Auto Paint & Body Repair Supplies
Auto Shop Lighting
Automotive Electronics
Automotive Shop Equipment & Tools
Car Battery Chargers & Jump Starters
Car Buffers and Polishers
Cutting/Threading
Electronics & Diagnostics
Industrial Hand Tools
Industrial Safety Equipment
Power Tools & Accessories
Tool Storage
Vehicle Specialty Tools




Social Bookmarks


  1. First, slow the vehicle down pull of the road to a safe spot. Don’t try to change your tire next to a busy street. No tire is worth your life.
  2.  Avoid stopping on a curve on the road or a steep incline. Both of these situations can be dangerous. Passing cars may not see you on a curve or coming over a hill. Also, you should never jack up your car on a incline.
  3. Once you have selected a good, safe spot, turn on your hazards.
  4.  Now its time to try and find all those tools that car manufacturers hide all over your car. I would suggest grabbing the owner’s manual before you start your search. Generally, most tire changing tools are stored in several different places and can be difficult to find without good instructions.
  5.  Locate the spare tire and remove it from the trunk or lower it from the under the car. Do not do this after the car has been jacked up.
  6.  Now you want to loosen the lug nuts on the flat tire. Remove the hubcap and grab the lug wrench that came with your car. Generally, these are not that great for breaking a frozen lug nut. If you need more leverage, you may look for a pipe to slip over the end and give you some more leverage or you can even purchase a cordless impact wrench and it won’t be a problem.
  7.  First just loosen the lug nuts one at a time. DO NOT take them off, you want to loosen them with the weight of the car holding the tire in place. It is a lot harder to do this with the car in the air and the tire free spinning.
  8.  Now you can jack up the vehicle with the jack provided. Slide the jack under the car until it comes in contact with the frame or axle. You should consult your owners for exact place to put the jack.  There are several different ways and the owners will tell you exactly.
  9.  Raise the car until the flat tire is at least 6 inches off of the ground. You will need this much clearance when you try to put the fully inflated spare tire back on.
  10.  Now you can remove the lug nuts and put them in a safe location. Make sure that no part of your body is under the car. Grab the wheel at the 9 and 3 o’clock positions and pull it straight toward you off the car.
  11.  Grab your spare tire and roll it over to the car. If you are strong enough, lift the tire up and line it up with lug nuts. Then push it firmly into place. If you are not strong enough, try leaning the tire against the lug nuts and raise or lower the jack until the tire is in the proper height.
  12.  Tighten all the lug nuts with your fingers. You will use the lug wrench or cordless impact later.
  13.  Lower the car down and remove the jack.
  •  Now tighten all of the lug nuts in a star pattern. Make sure you really put some effort into this. I would suggest going to a garage and having them torqued on properly.





  • Learn More
    1/2 Impact Wrench
    3/4 inch Impact Wrench
    3/8 Impact Wrench has Big Power in a Small Package
    A 1 inch Impact Wrench Can Deliver the Torque!
    Air Belt Sander Can Remove Just About Anything!
    Air Drill
    Air Flange Tool and Auto Body Repair
    Air Hammer
    Air Riveter
    Air Screwdriver
    An Air Impact Wrench Can Over Tighten Your Lug Nuts!
    An Air Saw is a lighter weight alternative to a Sawzall.
    An Air Shear Can Cut Through Almost Anything.
    Are air tools worth the extra cost when compared to electric tools?
    Astro Pneumatic Tool Company
    Automotive Tools for the home garage
    Car Buffer Polisher and Detailing Your Car.
    Chicago Pneumatic Tools
    Deep Impact Socket
    Die Grinders
    Different Types of Impact Socket Sets
    Dual Action Air Sander
    How an air impact wrench works.
    How to change a flat tire.
    Ingersoll Rand 2135Ti
    Ingersoll Rand 231C is a Classic Impact Wrench
    Ingersoll Rand Air Ratchet
    Ingersoll Rand Air Sander
    Ingersoll Rand Air Tools
    Ingersoll Rand Die Grinder - Simple and Tough
    Ingersoll Rand Drills
    Ingersoll Rand Impact Wrench
    Ingersoll Rand Impact Wrench Sets the Standard
    Ingersoll Rand Titanium Air Impact Wrenches are Light and Powerful
    Keep your Air Impact Wrench Safe from Contamination
    Needle scaler and debris removal.
    Orbital Air Sander
    Power and Air Tools
    Starrett Quality Precision Instruments
    The Ingersoll Rand Impact Wrench Sets the Standard.
    The Versatile Angle Grinder
    Why use an air ratchet wrench?



    Translate