Newspaper, which was once widely used when painting cars proved too porous for this purpose and often resulted in paint bleed-through. The poly coating in masking paper offers complete protection for the surfaces it is applied to if it is applied correctly. Masking products provide the maximum penetration resistance from the harsh solvents used in automobile sealers, lacquers, enamel paints and clear coat products. It eliminates dust contamination from fibers and performs well, even during wet sanding. Masking products easily withstand assaults from the powerful exhaust fans used to dry the automobiles after painting.Masking paper must be carefully applied to all non-painted surfaces and secured in place by masking tape designed for this purpose. These products are available in a variety of widths to fit any job. Narrow tape is best suited for applying around curves. Wide versions are more suitable for quickly covering large areas of the automobile. A variety of tools such as a masking paper dispenser, speed up the job and simplify the application process. Masking dispensers are available as hand-held implements or sophisticated multi-roll dispensers.
Protected surfaces must be completely dry and free of silicones, lubricants, dust, rust and other surface contaminants before masking paper and masking tape are applied. Unless curved surfaces are being masked the tape should not be stretched. Simply lay it on the surface to be protected and apply tape over the edge of the paper. It should overlap both the area to be painted and the area to be taped. Then, using a sharp, single-side razor blade, cut the tape along the line where the two areas should be divided and remove the tape over the area to be painted.
When covering trim, masking paper is not required. Select a masking
Posted in Auto Paint & Body
By
