The Liftstar Offshore Man Rider Air Winch is designed to lift the toughest of loads. This machine not only meets the most difficult approval standards (issued by classification societies and regulations specified by NPD, NMD, UK and HSE), but is also dedicated to the specified needs of its operators. The Liftstar Man Rider is a dedicated to its workforce, is a lifting winch that has Det Norske Veritas- type approval and also includes full traceability. At your convenience, there are many standard features that come with all Liftstar Offshore Man Rider Models. One feature is that there are two independent brakes- on is an internal oil bath multi disk brake and the other is an external drum band brake. Each brake can hold 180 percent of SWL! There is a flange mounted overload protection device for safety, and a main air emergency stop included only in the air models. Direct lever control is another feature, with fine inching characteristics and automatic return to neutral when the brakes are applied. The Liftstar Offshore Man Rider Winch also has high efficiency planetary gearing that is inside of the drum for better protection and minimum overall dimensions. All Liftstar Offshore Man Rider Winch models include a hot dip, galvanized drum guard, and sandblasting, carbozinc primer and offshore paint 290 ∞. This remarkable machine has a 3.1-pound material traceability certificates according to DIN 50049 (EN 10204) for load bearing parts available upon request at time of order. It includes a high quality stainless steel external brake cylinder and control rods as well, and all external fasteners larger than 10 mm are stainless steel of electro- zinc plated. The Liftstar Offshore Man Rider Air Winch is delivered with a skid frame for carefree installation. Continue reading for information about specific models. The Liftstar 150 kg/ Pneumatic LS150RLP…-E models have been intended particularly for personnel lifting uses in which a safety harness or a boatswain’s chair is used on fixed installations. These models have passed the DNV EC testing, and have found that both the winches and their technical files are in compliance with the requirements of the EC Machinery Directives. The LS150RLP-DP5M-F model has been found to be in compliance with section 28 of the NPD regulation for man riding applications using a safety harness in petroleum drill