Pinch Bar 5/8 x 3/4 x 16in.

Features and Benefits:Use tool for prying, alignment work and many other purposesOne end has a long, sharp pointed taper and the other end has a sharp, curved leverage bladeNickel-chrome-plated bar measures 5/8 x 16îWeight: 1 lb 4 oz. ....(more info)

7/8 X 18 Reg Black Oxide Cold Chisel

Features and Benefits: Extra long full finish Black oxide coating for corrosion resistance Cuts: 7/8" Body size: 3/4'; Overall length: 18" Made in the USAThis chisel is pencil shaped with a sharp blade screwdriver end.  When you hit the blunt end with a hammer, it forces the blade end into metal to mark it or even cu....(more info)

3/16 Long Taper Line Up Punch

Features and Benefits: Designed for use in aligning holes in metal pieces through which pins, rivets or bolts are inserted Hardened and tempered for maximum strength and durability Smooth finish and corrosion resistance Made in the U.S.A. Lifetime warranty....(more info)

Brass Drift Punch 3/4 x 8

Features and Benefits: Solid brass They are safe to use around flammable liquids Each has a knurled handle for better grip Weighs 1.05 lbs.This Solid brass punch will not damage, mar or spark materials.  They are safe to use around flammable liquids. Each has a knurled handle for better grip. It measures 3/4" x 8".....(more info)

1/4 Long Taper Line Up Punch

Features and Benefits: Designed for use in aligning holes in metal pieces through which pins, rivets or bolts are inserted Hardened and tempered for maximum strength and durability Smooth finish and corrosion resistance Made in the U.S.A. Lifetime warranty....(more info)

Drift Punch 1/4 x 5/8 x 11

Features and Benefits: Center less ground for accuracy Tip: 1/4" Length: 11" 5/8" Hex Made in the USAWorks great for installing or removing pins and shafts.  Also helps when aligning holes on metal pieces for screw or bolt insertion.  Made with the strength and durability to last!....(more info)

Drift Punch 5/32 x 1/2 x 8-1/2in.

Features and Benefits:5/32" tip, 8-1/2" length, 1/2" hexCenter less ground for accuracyReversed taper point which prevents punch from sticking in the work piece....(more info)

1/2 #12 Pilot Punch

Features and Benefits: Designed to apply equal pressure to the end of a pin driving it straight through the hole The ball on the center of the point end assures proper contact with the pin eliminating damage to the pin or hole wall....(more info)