Pilot Bearings Puller 7/8 to 2-1/8in.

Features and Benefits: These very versatile pullers are built specially for inside pulling jobs, and particularly for removing flywheel pilot bearings on automobiles, trucks, and tractors.Also very practical for pulling motor, generator, and magneto bearings.Reach: 1"Min: 7/8"Max: 2-1/8Wt.: 4/14 ....(more info)

2/3 Jaw, 7 Ton Mechanical Grip-O-Matic Puller

Features and Benefits: This 2/3 jaw puller has a 7 ton capacity Features reversible jaws Maximum reach: 5", Maximum spread: 10-1/2" Screw size: 11/16" - 18 x 9" Jaw thickness: upper - 5/16", lower - 11/32"; Jaw width: upper - 1", lower - 1"OTC has developed the most complete line of gear and....(more info)

2 Jaw, 7 Ton Mechanical Grip-O-Matic Puller

Features and Benefits: This long 2 jaw puller has a 7 ton capacity Features reversible jaws Maximum reach of 8-3/4", maximum spread: 9-1/2" Screw size: 11/16" - 18 x 9" Jaw thickness: 11/32"; Jaw width: 1"This complete line of gear and bearing pullers, enables you to remove and install parts for fast, ef....(more info)

Differential Bearing Puller with 1-1/4 to 4-1/2 Spread

Features and Benefits: This puller is used for removing differential side carrier bearings on a wide variety of passenger cars and light trucks Puller with 3-1/2" maximum reach, 1-1/4" to 4-1/2" spread This is primarily used for servicing Ford products Weight: 1 lb., 13 oz.Pulling side carrier bearings off a different....(more info)

Differential Bearing Puller with 6in. Spread

Features and Benefits: Puller with 3-1/4" maximum reach, 6" maximum spread. For servicing most General Motors, American Motors, and Chrysler products.Wt., 2 lbs. ....(more info)

Posi - Lock 3 Jaw/2 Ton Puller

Features and Benefits: Weight: 1.5 lb. Cage to guide jaws for fast set up, solid contact and superior safety T-handle locks jaw opening precisely where you set it Leverage up front for vice-like power and no slippage Center bolt threads designed for less effort to apply high torqueThe 2 Ton, 3 Jaw Puller, a general purpose puller tha....(more info)

2 Jaw, 7 Ton Mechanical Grip-O-Matic Puller

Features and Benefits: This 2 jaw puller has a 7 ton capacity Features reversible jaws Maximum reach: 5"; Maximum spread: 9" Screw size: 11/16" - 18 x 9" Jaw thickness: upper - 5/16", lower - 11/32"; Jaw width: upper - 1", lower - 1"OTC has developed the most complete line of gear and bearing....(more info)

Steering Wheel/Flange Type Puller Set

Features and Benefits: Two specialty pullers in one box. You get a flange-type puller for removal of harmonic balancers, timing gears, and other parts with two or three tapped holes. You also get a steering wheel, pulley, and fly-wheel puller. Flange-type puller combination. Includes flange-type puller and steering wheel puller with four sets....(more info)