Features and Benefits: All welded steel construction 7.5" chrome ram with 7" stroke 1/3 HP Haskel air motor Winch bed lift with auto brake Table range from 1" to 28"Bed plates, bearing punch and bearing shield included as standard equipment. Height: 78"; stroke: 7"; base width: 36"; pin diamet....(more info)
Features and Benefits: All welded steel construction 6" chrome ram with 7" stroke 1/3 Hp Haskel air motor Winch bed lift with auto brake Table range from 1" to 32"Bed plates, bearing punch and bearing shield included as standard equipment. height: 78"; Stroke: 7"; base width: 36"; pin diameter: 1.25....(more info)
Features and Benefits: All welded steel construction 6-1/4" chrome ram with 8" stroke Winch bed lift with auto brake 2 HP Emerson electric motor Two speed pump with remote pendant controlSpeed: No load 18"/Min = 40 sec up and down; Full load (50 tons) 4"/Min = 1-1/2 min down 20 sec up. Bed plates, bearing punch an....(more info)
Features and Benefits: All welded steel construction 4" Chrome ram with 6.75" stroke Winch bed lift with auto brake Dual return springs for fast ram retraction 2 stage pump for precise controlBed plates, bearing punch and bearing shield included as standard equipment. Table range from 1.5" to 34"; Height: 74"....(more info)
Features and Benefits: Tough, economical press is ideal for pressing rear axle bearings, piston pins, and much more 46" working area under the ram makes positioning even bulky work easy Large 30" x 46" work area under ram makes positioning of even bulky work easy Press bed is easily raised and lowered by a dependable lifting....(more info)
Features and Benefits:
Head is movable from side-to-side for full off-center load pressing.
Ram-to-work distance is adjusted by a forcing screw that's extended or retracted with a speed crank.
"Open Throat" feature is great for bulky jobs, and allows ram to be mounted outside press frame.
17 1/2-ton "Open ....(more info)
Features and Benefits: Stroke: 6-1/4" Height with screw ext: 19" Bending, pressing and straightening Weight: 221 lbs.This hydraulic bottle jack press has an overload valve built into them. This comes with the Lifetime Marathon Warranty, and also is made in the USA!Superceding OTC1823....(more info)
Features and Benefits: Accessories attach to ram's forcing screw or support work on the press bed The 34510 has a 3/4" diameter shank The 34511 has a 1" diameter shank Total weight 43 lbs.This set includes: 1124 bearing pulling attachment, 34510 ram pushing adapter, 34511 ram pushing adapter, 34807 V-pushing adapter, 189....(more info)
