Small Puller QP2

20033 Quarter Puller 9, Q.P. II Features and Benefits: Pulls Rear Quarter & Wheel Well Hooks above the lip of the wheel opening. Two curvatures (one on each side) will fit almost all cars. Easier and faster than clamps or jacks. 3000 lb. max. pull Q.P. II for smaller openings. ....(more info)

Double Grab Hook Assembly

Features and Benefits: Hook-up to any section of 3/8" chain Overall Length: 9" (241mm) Weight: 3lbs (1.36kg) Capacity: 7 tons (6,350 kg) Made of heat treated steelThis allows for a quick and easy hook-up.  It has a grab hook on one end and slip hook on the other. It's for hooking into clamps or pull rings.  It's ....(more info)

Welded Double Clevis

Features and Benefits: Overall Length: 8" (222mm) Weight: 3 lbs. (1.36kg) Capacity: 10 Tons (9,072 kg) Made of heat treated steelThis time saving tool allows for an easy connection to a 3/8" chain.  Simple to use and handy to have!....(more info)

Hook Tie-Down for Track Systems

Features and Benefits: Quick tie-down for track systems or back anchoring on frame racks Lip can be used for pulling damaged areas Varied multiple uses for chain lengthening or shortening Slot can be used for chain hook-up Designed for use with 3/8" chain.....(more info)

Double Claw Hook

Features and Benefits: Overall Length: 5" (127 mm) Weight: 2 lbs (.91 kg) Capacity: 6 tons (5,443 kg) Heat-treated steelThis is used as an accessory with draw bars or chain.  Use a pair with triangle or oval loop as a chain sorter, double hook, or bumper hook. Designed for use with 3/8" chain.  It's very durable and ....(more info)

BigBite Linear Pull Ring

Features and Benefits:Optional pull ring for BigBite Radius Clamp to allow technicians to perform in-line and/or multi-directional pulls. Maximum flexiability for technician to grab curved pinchwelds on all door openings.....(more info)

Handy Hook

Features and Benefits: Overall Length: 6" (165 mm) Weight: 2 lbs (.91 kg) Capacity: 5 tons (4,536 kg)This is a great time saver,  Mo-Clamp's easy hook-up system.  No chain is too long and hooks are not used on the chain.  Pulling slots can be used with 0900 hole pull adapters.  Designed for use with 3/8" chain....(more info)

R Hook, 3/8 Chain

Features and Benefits: Overall Length: 11" (280mm) Weight: 2 lbs (.91kg) Capacity: 5 tons (4,536kg) "R" hook with a 3/8" gold chain Made in the USAWhen securing a load be sure to have the right equipment/tools.  This GM "R" hook is heat-treated and has capacity of 5 tons.  Be safe, it's si....(more info)