Sled Type Cylinder Bore Gauge 2.157-7

Features and Benefits: Full face visibility with a 10-1/2" handle and a set of contact extensions Range: 2.125-7 Graduations: .0005" Reading: 0-20-0This sled style quickly and accurately checks cylinders for wear.  Also when used with a micrometer it will check the cylinder diameter.  Its durable construction allows ....(more info)

.200in. Range 0-100 Magnetic Base Dial Indicator Set

Features and Benefits:Jeweled bearing indicator with 1-1/2" diameter bezel and rear mounted plunger Two radiused contacts (3/16" diameter and 5/16" diameter)Powerful magnetic base with post Indicator rod1" long contact Two universal connectorsRange: .200"Grad: .001"Reading: 0-100 ....(more info)

Electronic Disc Brake Micrometer

Features and Benefits:Dust, water and oil resistantJaw depth: 3.5"Range: 0.3" - 1.3"Resolution: .00005"/.001mm"Direct inch/metric conversionCarbide tipped measuring facesIncludes measuring standardIncludes case....(more info)

Disc Brake Rotor & Ball Joint Gauge Set

Features and Benefits: Checks ball joint wear and disc rotor runout Checks tire and wheel runout, gear backlash, valve guide wear, etc. Meets state inspection requirements Indicator features 0-1" travel, and .001" graduations Includes shop-hardened case ....(more info)

4-5in. .001in. Grad I Beam Frame Micrometer

Features and Benefits Precision measurements to the thousandth and ten-thousandth of an inch require a quality micrometer. Central Tools manufactures many types of micrometers in inch and metric to meet all your measuring needs. Extra Hard Measuring Surfaces - Anvil and one-piece spindle are made of finest quality tool steel. Careful lapping on o....(more info)

3-4in. .001in. Grad I Beam Frame Micrometer

Features and Benefits:Precision measurements to the thousandth and ten-thousandth of an inch require a quality micrometer. Central Tools manufactures many types of micrometers in inch and metric to meet all your measuring needs. Extra Hard Measuring Surfaces - Anvil and one-piece spindle are made of finest quality tool steel. Careful lapping on o....(more info)

1/2 Drive Torque Wrench 30-250 ft./lbs.

Features and Benefits: Heavy duty chrome finish is stamped with English and metric scales A 1/2" ratchet drive with a 45-tooth design requiring only 8 degrees of hand travel for indexing The micrometer type setting adjusts from 30 to 250 ft./lbs. in 1 ft./lb. graduations (47.45 to 345.68 Nm metric range) It has a rubber cover ....(more info)

Electronic Caliper & E-Z Read

Set includes: 6in./150mm Electronic Caliper; .0005in./.01mm resolution, absolute/incremental measurements, direct inch/metric conversion and 4 way measurement0-1in. EZ-Read Digit Counter Micrometer, insulated frame, carbide measuring faces and direct reading to .0001in. without a vernier Includes shop-hardened case ....(more info)