Heavy Duty Transmission Kit

Manufacturer: NEXIQ TECH
Item Number: MPS606016

FREE SHIPPING!

Social Bookmarks

Features and Benefits

The Allison diagnostic PCMCIA card provides technicians with the ability to quickly diagnose, and perform “action request” functions on Allison World Transmission Electronic Control (WTEC) systems.
Includes Dana/Eaton Roadranger application
Includes Pro-Link Plus™
Includes Multi-Protocol Cartridge (MPC)
Includes ZF Meritor transmission application

This complete kit needed for diagnosing your heavy duty transmission. Features:

Includes:

MPS106004 Pro-Link® Plus with storage case
MPS208040 Multi-Protocol Cartridge (MPC)
MPS805005 Allison diagnostic application card
MPS804001 Dana/Eaton application card
MPS804017 ZF Meritor transmission application
MPS501002A Power and data cable
MPS404024 6-pin J1708 adapter
MPS404009 Allison J1962 cable
Manual

Allison Diagnostic application:

The Allison diagnostic PCMCIA card provides technicians with the ability to quickly diagnose, and perform “action request” functions on Allison World Transmission Electronic Control (WTEC) systems. This unique application is compatible with WTEC systems used on B-300, B-400, B-500 models and the MD and HD transmissions. The application also contains coverage for Allison’s Commercial Electronic Control CEC I) units on applicable MT, HT, V730, CLBT and DP models. The PCMCIA card inserts into the Multi-Protocol Cartridge (MPC), which is used with NEXIQ’s Pro-Link® Plus. Updates to any of NEXIQ’s PCMCIA cards can be performed by reflashing the card with the latest software via a floppy disk from NEXIQ using a personal computer.

Supports WTEC II & III and CEC 1 TCU
Data list parameters
Defined diagnostic codes
I/O wire states and shift inhibitors
General Purpose Inputs defined
View Customer Modifiable Constants (CMC)

Dana/Eaton Roadranger application

Eaton Autoshift/Autoselect GEN 1
Eaton ABS - Anti-lock brake system
Dana TMS - Tire management system
Eaton/VORAD
Eaton Top 2
Component test
Display and clear active and intermittent fault codes
Display and clear active intermittent fault codes
Displays transmission make, model, serial #, shift counts
Fault codes
G2S ABS
Generation 4 ABS
Generation 4B ABS
Generation 5 ABS
Monitor Autoshift/Autoselect system data EATON ABS SYSTEM
Monitor CEEMAT system data AUTOSHIFT/AUTOSELECT
Monitor data
Perform tests on vehicle interface, shift lever, throttle dip test, engine brake, air & hydraulic system
System information
System set-up and more...
Trailer ABS

Features and Functions:

Activate fast adaptive mode to allow attained range for reduced engine load at stop
Clear active and inactive codes
Create and save custom data lists
Display active and inactive codes
Display I/O wire assignments and functions (enabled/disabled)
ECU to adjust quickly to optimum shift characteristics
Enable clutch test to perform clutch pressure test or stall test in higher gears
General Purpose Inputs (GPI) defined
Perform snapshot data recording and playback to capture intermittent problems
Read Customer Modifiable Constants (CMCs)
Reset autodetect (WTEC III only) to verify presence retarder oil level sensor, throttle and engine coolant temperature sources
Reset throttle calibration to ensure proper TPS adjustment
Reset unadapted shifts to initial factory shift calibration settings
View diagnostic data list
View ECU EEPROM calibration information
View shift inhibits