Home > > Automotive Shop Equipment & Tools > Welding Equipment & Supplies > Plasma Cutters

Auto Arc 4500 Plasma Cutter

FREE SHIPPING!

Social Bookmarks

Features and Benefits:

• Rated output: 27 A at 90 VDC, 35% duty cycle
• 1/15 in. standoff cutting rated: 3/8 in. (10 mm) Quality: 1/2 in. (13 mm) Sever: 5/8 in. (16 mm)
• Drag cutting rated: 5/8 in. (8 mm) Quality: 3/8 in. (10 mm) Sever: 1/2 in. (13 mm)
• Plasma gas flow/pressure 4.5 CFM (129 L/min.) at 60 PSI (414 kPa)
• Weight net: 49 lb. (22 kg) Ship: 55 lb. (25 kg)
• Dual input voltage located in back of unit allows either 115 or 230 VAC input power and provides patented protection in case of incorrect switch position.† Unit provides full cutting capacity when powered by most engine-driven welders with 240 VAC auxiliary receptacles
• Starts without high-frequency so it will not interfere with controls or computers
• NEW! Pilot arc controller increases cutting capabilities and speeds, and improves tip life
• Postflow cooling circuit extends the life of the consumables and torch by cooling them with postflow air after the trigger is released
• LVC line voltage compensation provides peak performance power under variable conditions (power fluctuations up to +/- 15%) for steady cuts and cleaner ending cuts
• Gas/air filter/regulator inside the power source provides added protection during transportation.† Standard air connection on back panel for easy gas or air hookup

Includes:

• ICE-27C hand-held torch with 20 ft. cable
• 15 ft. heavy-duty work cable with clamp
• Extra consumables (3 electrodes, 3 tips and 1 air fitting)
• 10ft. power cord with 115 VAC, 20 A plug

Drop Ship Only