Liftstar “Offshore” Man Rider ™ Series

Designed to the toughest Type Approval standards issued by the classification societies and meets NPD, NMD and UK HSE regulations for personnel lifting operations on offshore installations. The “Liftstar Man Rider” is a dedicated personnel lifting winch offered with Det Norske Veritas (DNV) Type Approval and full traceability.

• Liftstar 150 kg / Pneumatic:

The LS150RLP…-E models have been specifically designed for personnel lifting applications in which a safety harness or a boatswain’s chair is used on fixed installations. They have passed the DNV (Det Norske Veritas) EC testing for these applications, i.e., both the winches and their technical files are in compliance with the requirements of the EC Machinery Directives. The LS150RLP-DP5M-F model is in compliance with section 28 of the NPD (Norwegian Petroleum Directorate) regulation for manriding applications using a safety harness in petroleum drilling and well activities on mobile/floating installations.

• Pneumatic and hydraulic models–

500 and 1000 kg capacity:
For use with assemblies using a platform, basket, carrier, etc… These models should be considered “part machines,” as they are intended for incorporation into an assembly consisting of a platform, a suspension system, etc… Therefore, they are delivered without the CE mark, but with a Declaration of Incorporation. However, since they are equipped with selected safety options, when the user applies for EC compliance of the entire personnel lifting system, the winch “part” will meet the EC requirements.

• Standard features::

All models:
•Two independent automatic brakes: an internal oil bath multidisc brake and an external drum band brake.Each can hold 180% of SWL.
•Flange mounted overload protection device
•Direct lever control with fine inching characteristics and automatic return to neutral when brakes are applied
•Main air emergency stop (for air models only)
•High efficiency planetary gearing is inside drum for better protection and minimum overall dimensions
•Hot dip, galvanized drum guard
•Sandblasting, carbozinc primer and offshore paint 290µ.
•3.1b material traceability certificates according to DIN 50049 (EN 10204) for load bearing parts available upon request at time of order
•Stainless steel external brake cylinder and control rods
•All external fasteners larger than 10 mm are stainless steel or electro-zinc plated
•Delivered with skid frame for easy installation LS1000RLP Man Rider The LS150RLP…-E and the LS150RLP-DP5M-F models:
•Upper and lower limit switches
•Slack wire detector
•Assisting spooling device – for better rope winding at no load
•Pre-equipped emergency lowering device (pressurized nitrogen bottle not supplied) Additional standard features:
•The LS150RLP-…-E includes a CE manual for installation and operation
•The LS150RLP-DP5M-F includes a rope payout system and filter-regulator-lubricator assembly

• Options

All models:
•Witness test(s) by a third party (DNV, Lloyd’s, ABS, etc) 500 and 1000 kg capacity models
•Upper and lower limit switches
•Assisting spooling device
•Pre-equipped emergency lowering device for air model only (pressurized nitrogen bottle not supplied)
•Slack wire detector (electric on hydraulic models) All models except LS150RLP-DP5M-F:
•PHS remote control piloted pendent allows infinitely variable up and down speeds with complete operator control. Fitted with an emergency stop device which acts directly on the main air flow